Automated Sliding & Cantilever Gates

Whatever you needs Advanced Digital Security will work with you to provide the ultimate solution to meet all your privacy and security requirements automated or non-automated.

Advanced Digital Security specialise in the manufacture of all gates using high quality mild steel.
Our gates are designed and manufactured to protect your commercial, industrial and domestic premises. Our gates are also force tested for safety. Read more about Electric Gate Safety.

Arrange a free site visit to discuss your requirements in more detail – we offer the best advice on your gate design and automation.

hero-sliding-gates

Design, Manufacture, Install and Maintain

  • A full risk assessment is carried out prior to each install
  • We will ensure that your automated gate is safe as possible to BNS 12453:2001
  • Quality mild steel is used for all our gates with a range of decorative details available
  • All our gates are fitted with the essential health and safety requirements
  • For a fantastic long lasting finish we can galvanise and vinyl spray or powder coat

Sliding Gates

Most sliding gates installed correctly will provide very high levels of security especially against attempted forced entry. The fact they slide sideways means that a lot of space is left free behind the gate where a normal swing gate would have to operate, making car parking a lot easier and giving more spaces . A sliding gate can be produced to very wide sizes very easily and generally only requires one electric motor to operate therefore saving money over the two motors required for a pair of swing gates. Many gates we have installed have been designed in the style of a pair of gates if appearance is particularly important. Sliding gates can be activated from many types of access control equipment such as digital keypad, push button, radio fobs, proximity or card swipe systems, number plate recognition, biometric reader, photocell or induction loop and even by mobile phone connection.

Cantilever

No need for tracking along the length of the opening as it is suspended over the entrance with horizontal posts.
Its quieter than track gates and reduces the need to keep the tracking clear of debris. The channel or beam is set on bearing rollers which are engineered to a high standard and which, in turn, are bolted down to a large concrete pad. The gate is then created by being fabricated onto the beam or cantilever gate channel. The Gate is then mounted on the bearing rollers which allows the gate to glide smoothly some 50 to 80mm above the height of its concrete base. The base needs to be set at a height that is low enough to maximise security but high enough so that the gate glides freely over any obstacle in the opening, such as manhole covers, railway lines or objects that would normally prevent the laying of a track for a tracked sliding gate.